Golf Mk4
| Assembly overview - Oil filter bracket |
| 1 - | Plug, 40 Nm |
| q | Renew |
| 2 - | Seal |
| q | Permanently attached to → Item. |
| 3 - | Spring |
| q | For pressure relief valve, approx. 4 bar. |
| 4 - | Piston |
| q | For pressure relief valve, approx. 4 bar. |
| 5 - | Gasket |
| q | Renew |
| 6 - | Non-return valve, 8 Nm |
| q | Different versions: bolted or pressed in |
| q | Pressed in valves are not available as replacement parts |
| 7 - | Seal |
| q | Push on up to shoulder of sealing cap → Item |
| 8 - | Cap |
| 9 - | Securing clip |
| 10 - | Plug, 15 Nm |
| 11 - | Seal |
| q | If seal is leaking, nip open and renew. |
| 12 - | 1.4 bar oil pressure switch -F1-, 25 Nm |
| q | Black |
| q | Checking → Chapter. |
| 13 - | Seal |
| q | If seal is leaking, nip open and renew. |
| 14 - | Oil filter bracket |
| 15 - | 15 Nm + 1/4 turn (90 °) further |
| q | Renew |
| 16 - | Gasket |
| q | Renew |
| q | Fit into lugs on oil cooler. |
| 17 - | Oil cooler |
| q | Coat contact surface to oil filter bracket outside the seal with sealing paste -AMV 188 100 02- |
| q | Ensure clearance to adjacent components. |
| q | See note → Chapter. |
| 18 - | 25 Nm |
| 19 - | Oil filter |
| q | Loosen with strap wrench or oil filter tool -3417-. |
| q | Tighten by hand. |
| q | Observe installation instructions on oil filter. |
