Volkswagen Workshop Service and Repair Manuals > Golf Mk4 > Engine | 4-cyl. injection engine (2.0 ltr.), mechanics | Fuel supply, gas operation | Removing and installing parts of fuel supply system | Removing and installing fuel gauge sender G

Removing and installing fuel gauge senderG

Removing and installing fuel gauge sender -G-

Removing

–	Remove fuel delivery unit → Chapter.

–	Release connector lugs on lines -3- and -4- and pull off.

–	Lever up retaining tabs -1- and -2- using a screwdriver and pull fuel gauge sender -G- off downwards -arrows-.

Note

Vehicles with four-wheel drive have two fuel gauge senders. Removing fuel gauge sender 2 -G169- → Chapter.

Installing

–	Insert fuel gauge sender into guides on fuel delivery unit and press upwards until it engages.

Volkswagen Workshop Service and Repair Manuals