volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing fuel tank with attachments and fuel filter > < Removing and installing thermostat
Removing and installing parts of fuel supply system
Removing and installing parts of fuel supply system
  Note
t  Hose connections are secured with either spring-type or clamp-type clips.
t  Always replace clamp-type clips with spring-type clips.
t  Fuel hoses in engine compartment must be secured only with spring-type clips. The use of clamp or screw-type clips is not permissible.
   
t  The fuel extractor -VAS 5190- is recommended for emptying of the fuel tank.
t  For assembly of the hose clips, use one of the following: assembly tool for spring-type clips -VAS 5024- or spring-type clip pliers -VAS 5024A- or hose clip pliers -V.A.G 1921-.
Observe safety precautions → Chapter.
Observe rules for cleanliness → Chapter.
Repairing accelerator mechanism → Chapter.
Adjusting throttle cable → Chapter.
Checking electronic power control (EPC) → Chapter.
Repairing parts of activated charcoal filter system → Chapter.
  W00-1107

Removing and installing fuel tank with attachments and fuel filter > < Removing and installing thermostat