Golf Mk4
Front exhaust pipe and catalytic converter with attachments |
1 - | Hot air shield |
2 - | Lambda probe -G39-, 50 Nm |
q | Grease only thread with hot bolt paste -G 052 112 A3-; hot bolt paste -G 052 112 A3- must not get into slots in probe body. |
q | Remove and install using Lambda probe open ring spanner set -3337-. |
3 - | 10 Nm |
4 - | 25 Nm |
5 - | 25 Nm |
q | Renew. |
6 - | Connecting pipe |
q | For secondary air inlet. |
7 - | Bolted connection, 35 Nm |
8 - | Exhaust manifold |
9 - | Gasket |
q | Renew. |
10 - | Front exhaust pipe with catalytic converter. |
11 - | Lambda probe after catalytic converter -G130-, 50 Nm |
q | Grease only thread with hot bolt paste -G 052 112 A3-; hot bolt paste -G 052 112 A3- must not get into slots in probe body. |
q | Remove and install using Lambda probe open ring spanner set -3337-. |
12 - | 40 Nm |
q | Renew. |
13 - | Gasket |
q | Renew. |