Golf Mk4
Dismantling and assembling top part of intake manifold |
1 - | 8 Nm |
q | Note different lengths of securing bolts. |
2 - | Throttle valve module -J338- |
q | If renewed, adapt engine control unit to throttle valve module → Chapter. |
3 - | Seal |
q | Renew if damaged. |
4 - | Pressure valve |
q | Protects intake manifold from damage if subjected to excessive pressure. |
5 - | Vacuum hose |
q | From intake hose → Item. |
6 - | To brake servo. |
7 - | 5 Nm |
8 - | Top part of intake manifold |
q | With variable intake manifold change-over. |
9 - | Body-bound rivet |
10 - | Vacuum hose |
q | From fuel pressure regulator → Item. |
11 - | To vacuum control element. |
q | To underside of intake manifold top part. |
12 - | To T-piece. |
q | → Item |
13 - | Variable intake manifold change-over valve -N156- |
14 - | 8 Nm |
15 - | Rubber busing. |
16 - | Hot air shield with intake manifold support. |