volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing front sealing flange

Golf Mk4

Removing
Removing
–  Remove poly-V-belt → Chapter.
–  Remove toothed belt → Chapter.
   
–  Remove crankshaft toothed belt pulley. To do this, lock pulley using counterhold tool -3415-.
–  Drain engine oil.
–  Remove sump → Chapter.
–  Unbolt front sealing flange.
–  Remove sealing flange; if necessary, loosen using light blows with a rubber headed hammer.
–  Remove sealant residue on cylinder block with a flat scraper.
  N13-0401
–  Remove residual sealant on sealing flange using a rotating plastic brush (wear eye protection).
–  Clean sealing surfaces. They must be free of oil and grease.
  A17-0030

Installing > < Removing and installing front sealing flange