Special tools, workshop equipment, testers, measuring instruments and auxiliary items required
-
◆ 3185 Jointed wrench
-
◆ T10058 Socket insert
-
◆ V.A.G 1331 Torque wrench (5 ... 50 Nm)
-
◆ Hand drill with plastic brush attachment
-
◆ Silicone sealing compound D176404 A2
Removing
-
‒ Remove centre and right-hand sound insulation:
=> General body repairs, exterior; Repair group 50; Noise insulation (petrol engine) - Assembly overview
-
‒ Remove oil sump protection , fig. 2.
-
‒ Drain engine oil.
Note:
Observe waste disposal regulations!
Note:
Loosen bolts on flywheel end of sump with jointed wrench 3185 and remove with socket T10058.
-
‒ Remove oil sump. Remove oil sump, it may be necessary to release sump by using light blows with a rubber headed hammer.
-
‒ Remove sealant residue from cylinder block with a flat scraper.
|