volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Engine oil > < Renewing valve stem seals

Golf Mk4

Removing and installing parts of lubrication system
Removing and installing parts of lubrication system
  Note
t  If when repairing an engine, metal shavings or large quantities of small metal particles caused, for example, by partial seizure of crankshaft and conrod bearings are found in the engine oil, one must apart from thoroughly cleaning oil passages, renew all oil spray jets, the oil non-return valve, the oil cooler and oil filter element to prevent consequential damage.
t  The oil level must not be above the max. mark - danger of damage to catalytic converter! Markings → Fig..
Engine oil → Chapter
Assembly overview - Oil filter housing → Chapter
Assembly overview - Oil pump → Chapter
Removing and installing sump → Chapter
Checking oil pressure and oil pressure switch → Chapter
   

Engine oil > < Renewing valve stem seals