Golf Mk4
Assembly overview - Air cleaner |
1 - | Heater element for crankcase breather -N79- |
q | For crankcase breather. |
q | Heater element for crankcase breather -N79-, selected countries only |
q | Checking → Fig.. |
q | Resistance at ambient temperature (approx. 25 °C), specification: 7...12 Ω |
2 - | Connector |
q | Black, 2-pin |
q | For heater element for crankcase breather -N79- |
q | Check heater element voltage supply between contacts 1 and 2 with engine running, specification: min. 11.5 V |
3 - | Connecting hose |
q | For air shrouding of injectors |
4 - | Air mass meter -G70- with intake air temperature sender -G42- |
q | Contacts from sensor and connector are gold-plated |
5 - | Connector |
q | Black, 5 pin |
q | Contacts from sensor and connector are gold-plated |
6 - | Seal |
q | Renew if damaged. |
7 - | Air cleaner upper part |
8 - | 6 Nm |
9 - | Filter element |
10 - | Air cleaner lower part |
11 - | Air duct |
12 - | 10 Nm |
13 - | Intake hose |
q | From air cleaner to throttle valve module |
q | Ensure that spring-type clips are securely seated |
14 - | To cylinder head cover |
15 - | Intake hose |
q | For crankcase breather. |
q | From crankcase breather valve to cylinder head cover |
q | Check for secure seating. |
q | Press together at front to release. |
16 - | To throttle valve module -J338- |
17 - | To crankcase breather valve |
q | Below heater element |