Golf Mk4
| Installing and adjusting heating and air conditioning cables |
Note| t | The cable sheaths are colour coded. |
| t | Check cables before installing; replace stiff or damaged cables. |
| t | First connect cables to removed controls, then adjust cables at air conditioner levers and secure them. |
| t | When rotary knobs are turned, all flaps must audibly contact stop. |
| 1 - | Central flap cable |
| q | From air distribution rotary knob to central flap. |
| q | Marking for cable sheath fastening: |
| Left-hand drive: yellow. |
| Right-hand drive: grey. |
| q | Adjusting cable at central flap → Chapter. |
| 2 - | Footwell/defroster flap cable |
| q | From air distribution rotary knob to footwell/defroster flap. |
| q | Marking for cable sheath fastening: |
| Left-hand drive: green. |
| Right-hand drive: black. |
| Renewing: |
| – | Remove heating and air conditioning controls → Chapter. |
| – | Remove trim under steering column → Rep. Gr.68. |
| – | Unclip cable on heater and air conditioner unit. |
| – | Adjust cable at footwell/defroster flap → Chapter. |
| 3 - | Heating and air conditioning controls |
| q | Removing → Chapter. |
| 4 - | Temperature flap cable |
| q | From temperature rotary knob to temperature flap. |
| q | Marking for cable sheath fastening: |
| Left-hand drive: beige. |
| Right-hand drive: white. |
| q | Adjusting cable at temperature flap → Chapter. |