volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing central flap control motor V70 > < Removing and installing air flow flap control motor V71

Golf Mk4

Removing and installing temperature flap control motorV68
Removing and installing temperature flap control motor -V68-
Removing
–  Remove glove box → Rep. Gr.68.
–  Remove trim under steering column → Rep. Gr.68.
–  Remove centre console → Rep. Gr.68
–  Remove connecting piece → Chapter.
   
–  Pull off connector -1-.
–  Carefully unclip operating rod -2- from lever -arrow A- using a screwdriver.
–  Remove securing bolts -4-.
–  Remove temperature flap control motor -V68--3-.
Installing
–  Install in reverse order.
–  “Code control unit” and then initiate “basic setting” using vehicle diagnosis, testing and information system -VAS 5051B- → Chapter.
  N87-0113

Removing and installing central flap control motor V70 > < Removing and installing air flow flap control motor V71