volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Dismantling and assembling heater unit > < Heater unit
Removing and installing heater unit
Removing and installing heater unit
  WARNING
Danger of scalding injuries.
The cooling system is pressurised. When the engine is warm, the coolant temperature may be above 100° C.
If necessary, release pressure before carrying out repairs.
–  Removing and installing dash panel → Rep. Gr.70.
–  Seal heat exchanger to prevent coolant from running out.
   
–  Remove dash panel cross member → Chapter
–  Detach nuts (3.7 ± 0.2 Nm) from bulkhead side.
  N80-10098

Dismantling and assembling heater unit > < Heater unit