volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Renewing ATF > < Checking ATF level
Topping up ATF
Topping up ATF
   
–  With engine “running”, screw in adapter for filling oil -VAS 6262/2- hand tight.
  W00-10419
–  Add 1 l of ATF.
–  Pull off adapter for oil filling -VAS 6262- at quick-release connection and check:
If ATF now flows out of hole in adapter:
ATF does not need topping up.
–  Drain ATF until it drips.
–  Fit new seal to plug and tighten to 15 Nm. This completes the ATF check.
If no ATF drips out:
–  Add another litre → Chapter.
  WARNING
An ATF level which is too low or too high will impair the function of the gearbox. But if the gearbox was 2 litres low, it must be carefully inspected. There is probably a “major” leak.
  N37-10328

Renewing ATF > < Checking ATF level