volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing ATF cooler > < Dismantling and assembling procedure

Golf Mk4

Removing ATF cooler
Removing ATF cooler
–  First check whether a coded radio is fitted. If so, obtain anti-theft code.
–  Move selector lever to “P” position.
–  With ignition switched off, disconnect battery earth strap.
   
–  Remove intake hose -1-, connector -2- and hose -3- from air mass meter.
–  Remove complete air filter housing.
  A37-0192
–  Clamp off ATF cooler hoses with hose clamps to 25 mm -3094- and detach from ATF cooler.
  N37-0783
–  Remove ATF cooler -1- from gearbox -arrow A-.
  N37-0799

Installing ATF cooler > < Dismantling and assembling procedure