volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Renewing bevel box output flange oil seal (bevel box removed) > < Checking oil level or changing oil in Haldex coupling

Golf Mk4

Changing oil filter for Haldex coupling
Changing oil filter for Haldex coupling
Special tools and workshop equipment required
   
t  Angled ring spanner -T10066-
Removing
–  Place drip tray underneath.
  W00-1064
–  Loosen oil filter with angled ring spanner -T10066- and screw out.
Installing
Location: oil filter -A- - hidden by sub-frame - is located on right-hand side of vehicle near front bearing bracket -B-.
–  Moisten O-ring of new oil filter with oil for Haldex coupling.
–  Screw in oil filter -A- and tighten to specified torque with spanner -T10066- → Item.
–  Check oil level in Haldex coupling → Anchor and change oil in Haldex coupling if necessary → Anchor.
  N39-0827

Renewing bevel box output flange oil seal (bevel box removed) > < Checking oil level or changing oil in Haldex coupling