volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Adjusting output shaft > < Table of shims

Golf Mk4

Carrying out check measurement
Carrying out check measurement
   
–  Install universal dial gauge bracket -VW 387- and dial gauge.
–  Rotate input shaft so that tapered roller bearings settle.
–  Press input shaft in direction of arrow.
–  Bearing play should be min. 0.01 … max. 0.09 mm.
  Note
If the bearing play cannot be measured, but input shaft play is perceptible and the input shaft turns freely, the adjustment is acceptable.
  V35-1126

Adjusting output shaft > < Table of shims