volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing over-centre spring > < Removing

Golf Mk4

Installing new clutch pedal switch
Installing new clutch pedal switch
   
Distinguishing between clutch pedal switches
  N30-10257
Clutch pedal switch
-A- = »without light dome« on plunger head -arrow-
l  Pull plunger out fully prior to installation.
-B- = »with light dome« on plunger head -arrow-
l  Plunger is not allowed to be pulled out.

l  Clutch pedal -4- (⇒ previous figure) must be in rest position.
–  Guide clutch pedal switch -F36- through access hole, press against clutch pedal and secure by turning 45° to right.
–  Push connector onto clutch pedal switch -F36-.
–  Install driver side footwell cover → General body repairs, interior; Rep. gr.68.
   

Removing and installing over-centre spring > < Removing