volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Renewing oil seal for left flange shaft

Golf Mk4

Removing
Removing
–  Remove wheel.
–  Remove centre and left parts of noise insulation below engine and gearbox, if fitted. → General body repairs, exterior; Rep. gr.66
–  Turn steering to left lock.
–  Unbolt drive shaft from flange shaft.
   
–  Mark installation position of bolts -1-.
–  Remove bolts -1-.
–  Raise drive shaft as high as possible and secure. Take care not to damage paint on drive shaft in the process.
–  Remove flange shaft securing bolt by screwing two bolts into flange and counterholding flange shaft with a lever.
–  Place drip tray under gearbox.
–  Pull out flange shaft with compression spring.
  N39-0804
–  Pull out flange shaft oil seal using multi-purpose tool -VW 771- and puller hooks -VW 771/37-.
  N39-1090

Installing > < Renewing oil seal for left flange shaft