| –
| To avoid damage to running surface of bearing on shaft, turn shaft during pressing procedure -arrow-. |
| –
| Secure bearing with a new retaining ring. |
| –
| Carefully drive in right flange shaft while turning it. |
| –
| Secure flange shaft using countersunk bolt and tighten to specified torque → Item. |
| Vehicles with 4-cylinder engine |
| Continuation for all vehicles |
| –
| Attach drive shaft shield, if present, to bevel box. |
| –
| Check oil in gearbox with bevel box → Chapter. |
| –
| Install noise insulation, if fitted. |
|
|
|
