volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Test step 2 > < Contact assignment of connector

Golf Mk4

Test step 1
Test step 1
Check of voltage supply from all-wheel drive control unit -J492-.
–  Switch to 20 V measuring range.
–  Switch on ignition.
   
–  Measure between contact -1- and contact -2- (earth) on detached connector.
Specification: battery voltage
If specification is not obtained, repair wiring using current flow diagram → Current flow diagrams, Electrical fault finding and Fitting locations.
–  Switch off ignition.
  N01-0321

Test step 2 > < Contact assignment of connector