Volkswagen Workshop Service and Repair Manuals > Golf Mk4 > Power transmission | 6-speed manual gearbox 02M, 02Y, all-wheel drive | Gearbox mechanics,operation, construction,diff. | Removing and installing bevel box | Removing and installing bevel box (vehicles with 5 and 6-cylinder engines)

Torque settings

Bevel box to manual gearbox; always renew bolt

40 Nm + 45°

Flexible joint with heat shield to bevel box flange → Item.

Installing bevel box/engine carrier free of tension

When installing bevel box carrier, observe following sequence:

–	Screw in all bolts hand-tight.

–	Tighten bolts -B- (M10 x 22) to 10 Nm.

–	Tighten bolts -A- (M10 x 50) to 50 Nm.

–	Tighten bolts -B- to 40 Nm.