| t
| Tapered roller bearings are allocated according to gearbox date of manufacture and gearbox code in the Parts Catalogue. |
| t
| All tapered roller bearings fitted to the same shaft must be renewed as a set. Use same make of bearings. |
| t
| Install needle bearings with lettered side (thicker metal) towards fitting tool. |
| t
| Do not interchange outer or inner races of bearings of the same size. The bearings are matched in pairs. |
| t
| Heat taper roller bearing inner races to approx. 100 ±C before installing. |
DANGER! | Do not touch parts heated to 100 °C with bare hands. |
|
|
|
|
