Volkswagen Workshop Service and Repair Manuals > Golf Mk4 > Power unit | 4-cyl. injection engine (natural gas) | Engine assy,cylinder block,crankcase | Removing and installing engine

Securing engine to assembly stand

Secure engine on engine and gearbox support -VAS 6095- to carry out repairs.

Procedure

–	Remove gearbox.

–	Attach lifting tackle -2024 A- as follows and lift from engine and gearbox jack -V.A.G 1383 A- using workshop crane -VAS 6100-.

Pulley end: 3rd hole in hook at position 2

Flywheel end: 3rd hole in hook at position 8

Caution

Use securing pins on hooks and locking pins to avoid damage to engine and vehicle.

Note

t	The positions marked 1...4 on the bar must be towards the pulley end.

t	The holes in the hooks are counted up from the hook.

–	Secure engine on engine and gearbox support -VAS 6095-.

Volkswagen Workshop Service and Repair Manuals