| –
| Pull fuse No. 32 out of fuse holder. |
Note | Removing the fuse interrupts the voltage supply to the injectors. |
| –
| Pull connectors off outer injectors. |
| –
| Pull off spark plug connectors using puller -T10112-. |
| –
| Remove spark plugs using spark plug socket and extension -3122 B-. |
| –
| Check compression using compression tester -V.A.G 1763- and adapter -V.A.G 1763/6-. |
Note | –
| Have a second mechanic operate the starter. |
| –
| Operate starter until tester shows no further pressure increase. |
| Maximum permissible difference between all cylinders: 3 bar |
| –
| After completing work, clear engine control unit fault memory, because removing the fuse will cause a fault to be stored → Chapter. |
|
|
|
