volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Tensioning toothed belt > < Removing

Golf Mk4

Installing
Installing
Condition
l  The pistons must not be positioned at TDC.
Procedure
–  Place toothed belt on crankshaft toothed belt pulley and coolant pump (observe DOR).
  Note
t  Engine removed:
t  Beforehand install lower toothed belt guard and vibration damper/belt pulley.
Adjusting valve timing
  Note
When camshaft is turned, crankshaft must not be at TDC. Danger of damage to valves and piston crowns.
   
–  Align mark on camshaft sprocket with mark on toothed belt guard.
Engine installed:
  A13-0077
–  Turn crankshaft to TDC No.1 cylinder (vehicles with manual gearbox).
  A13-0045
–  Turn crankshaft to TDC No.1 cylinder (vehicles with automatic gearbox).
Engine removed:
  A13-0043
–  Set vibration damper to TDC No. 1 cylinder -arrows-.
–  Fit toothed belt to tensioning roller and camshaft sprocket.
  A13-0076

Tensioning toothed belt > < Removing