| Repairing ignition system |
| General notes on ignition system |
| t
| For trouble-free operation of electrical components, a voltage of at least 11.5 V is necessary. |
| t
| During some checks, it is possible that the control unit will detect and store a fault. Therefore, after completing all checks and repairs, read the fault memory and clear if necessary → Chapter. |
| t
| If, after fault finding, repairs or component tests, the engine starts, runs for a short period and then stops, then the fault may be that the immobiliser is blocking the engine control unit. In this case, the control unit must be adapted. |
| Assembly overview - ignition system → Chapter. |
|
|
|
