Golf Mk4
|
1 - | 40 Nm |
2 - | From front exhaust pipe |
3 - | Double clamp |
q | Note installation position → Fig.. |
4 - | 25 Nm |
5 - | Mounting |
q | Note installation position → Fig.. |
6 - | Mounting |
q | With support ring. |
7 - | Bracket |
8 - | Mounting |
9 - | Rear silencer |
q | Aligning rear silencer free of stress → Fig. |
10 - | Separating point |
q | For repair cases. |
q | Marked by three indentations around circumference of exhaust pipe |
q | Exhaust pipe and rear silencer are generally installed as a single component. In event of repair, exhaust pipe and rear silencer are supplied individually with a double clamp (repair solution) to facilitate connection. |
q | Using e.g. pneumatic sabre saw -V.A.G 1523A-, cut through exhaust pipe at right angles on the separating point → Fig. |
11 - | 20 Nm |
12 - | Tunnel bridge |