t
| Spring-type clip pliers -VAS 5024A- are recommended for installation of spring-type clips. |
t
| Do not install hose connections with oil-based lubricant. |
t
| Charge air system must be free of leaks. |
t
| Before screwing on oil supply line, fill turbocharger at connection with engine oil. |
t
| After installing turbocharger run engine for approx. 1 minute at idling speed, do not rev engine. This ensures that the turbocharger is adequately lubricated. |
t
| Renew self-locking nuts. |
|
|
|