Golf Mk4
Parts of cooling system - engine side |
1 - | 15 Nm |
2 - | Coolant pump |
q | Check for ease of movement. |
q | Note installation position. |
q | Removing and installing → Chapter |
3 - | O-ring |
q | Renew |
4 - | To top of radiator |
q | Coolant hose schematic diagram → Chapter. |
5 - | To cylinder head |
q | Coolant hose schematic diagram → Chapter. |
6 - | To top of expansion tank |
q | Coolant hose schematic diagram → Chapter. |
7 - | Upper coolant pipe |
q | Clipped into bulkhead of plenum chamber. |
q | Coolant hose schematic diagram → Chapter. |
8 - | O-ring |
q | Renew |
9 - | Coolant temperature sender -G62- |
q | With coolant temperature gauge sender -G2-. |
10 - | Securing clip |
q | Check for secure seating. |
11 - | To heat exchanger |
q | Coolant hose schematic diagram → Chapter. |
12 - | From heat exchanger |
q | Coolant hose schematic diagram → Chapter. |
13 - | 10 Nm |
14 - | Connection |
15 - | Coolant pipe |
q | Coolant hose schematic diagram → Chapter. |
16 - | To top of radiator |
q | Coolant hose schematic diagram → Chapter. |
17 - | To bottom of expansion tank |
q | Coolant hose schematic diagram → Chapter. |
18 - | To bottom of radiator |
q | Coolant hose schematic diagram → Chapter. |
19 - | Connection |
q | For thermostat |
20 - | Thermostat |
q | Removing and installing → Chapter |
q | Observe installation position, → Chapter Removing and installing thermostat |
q | Checking: Heat thermostat in water. |
q | Opening begins at approx. 85 °C. |
q | Ends at approx. 105 °C. |
q | Opening lift min. 7 mm. |
21 - | Oil cooler |