| –
| Note position of tensioning roller indicator -1-. Press toothed belt forcefully with thumb -arrow-. The indicator must move. |
| –
| Release tension on toothed belt. |
| –
| Turn crankshaft two turns in engine direction of rotation. |
| –
| Then check position of indicator. It must have returned to its original position. |
| If tensioning roller does not return to its initial position |
| –
| Replace tensioning roller. |
| If both tensioning rollers are OK |
| –
| Reinstall toothed belt guard. |
| –
| Refit crankshaft pulley. Observe the following: |
| t
| The belt pulley securing bolt and the toothed belt pulley must be renewed. |
| t
| When installing belt pulley, observe fixing arrangement to toothed belt pulley. |
| t
| Tightening procedure for the new oiled bolt → Chapter. |
| –
| Install engine bracket. |
| –
| Install engine assembly mounting. |
|
|
|
