volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Renewing crankshaft oil seal - belt pulley end

Golf Mk4

Removing
Removing
–  First remove main drive toothed belt → Chapter.
–  Now remove crankshaft toothed belt pulley.
–  To guide seal extractor -3240-, screw toothed belt pulley securing bolt into crankshaft to stop.
–  Screw inner part of oil seal extractor -3240- two turns (approx. 3 mm) out of outer part and lock using knurled screw.
   
–  Lubricate threaded head of oil seal extractor -3240-, place it in position and, exerting firm pressure, screw it into oil seal as far as possible.
–  Loosen knurled screw and turn inner part against crankshaft until the oil seal is pulled out.
  N13-0157

Installing > < Renewing crankshaft oil seal - belt pulley end