–
| Connect 121-pin adapter cable -V.A.G 1598/31- to control unit wiring harness. The engine control unit remains disconnected. |
–
| Check wiring between 121-pin adapter cable -V.A.G 1598/31- and 2-pin connector for open circuit referring to current flow diagram. Contact 1 and socket 25 (signal) of 121-pin adapter cable -V.A.G 1598/31-, contact 2 and socket 47 (earth) of 121-pin adapter cable -V.A.G 1598/31-, wire resistance: max. 1.5 Ω. |
–
| Additionally check wiring for short circuit to one another and short circuit to positive or earth. |
|
|
|