Golf Mk4
| Part II |
| 1 - | Knock sensor 1 -G61- |
| q | Gold-plated contacts. |
| 2 - | 20 Nm |
| q | The specified torque influences the function of knock sensor 1 -G61-. |
| 3 - | Oil dipstick |
| q | The oil level must not be above the max. mark! |
| q | Markings → Fig.. |
| 4 - | Bracket |
| q | For ignition transformer |
| 5 - | 10 Nm |
| 6 - | 10 Nm |
| 7 - | 10 Nm |
| 8 - | Bracket |
| 9 - | 6 Nm |
| 10 - | Oil filter bracket with attachments |
| q | Dismantling and assembling → Chapter. |
| 11 - | 15 Nm + 1/4 turn (90°) further |
| 12 - | Gasket |
| q | Renew. |
| 13 - | 10 Nm |
| 14 - | Engine speed sender -G28- |
| 15 - | O-ring |
| q | Renew. |
| 16 - | Coolant pipe |
| 17 - | 15 Nm |
| 18 - | Seal |
| q | Renew. |
| 19 - | 45 Nm |
| q | Renew. |
| q | Observe tightening sequence → Rep. gr.87. |
| 20 - | Compact bracket |
| q | For poly V-belt tensioner, alternator, power-assisted steering vane pump and air conditioner compressor. |
| 21 - | Cylinder block |
| q | Removing and installing sealing flange and pressure plate/drive plate → Chapter |
| q | Removing and installing crankshaft → Chapter. |
| q | Dismantling and assembling pistons and conrods → Chapter. |
| 22 - | Seal |
| q | Renew. |
| 23 - | Plug |
| 24 - | 20 Nm |
