Golf Mk4
Repairing parts of exhaust gas recirculation system |
1 - | Gasket |
q | Renew. |
2 - | 10 Nm |
3 - | Connecting pipe |
4 - | Exhaust manifold |
5 - | 4 Nm |
6 - | Retaining clamp |
q | For wire of Lambda probe -G39-. |
7 - | 80 Nm |
8 - | Lambda probe -G39-, 50 Nm |
9 - | 6-pin connector |
q | Fitting location: Right on underside of vehicle → Fig. |
10 - | 60 Nm |
11 - | Throttle valve module -J338- |
12 - | 25 Nm |
13 - | Exhaust gas recirculation valve -N18- with exhaust gas recirculation potentiometer -G212- |
q | If renewed, erase learnt values and readapt engine control unit → Chapter. |
14 - | 6-pin connector |
15 - | From air filter. |
16 - | Breather hose |
17 - | Connection |
q | For combination valve and exhaust gas recirculation valve -N18- |
q | Secondary air system → Chapter |