Golf Mk4
Removing and installing parts of ignition system |
1 - | Ignition cable |
q | 4…8 kΩ |
q | With suppression connector and spark plug connector. |
q | Check for continuity. |
q | Pull off spark plug connector using puller -T10112-. |
2 - | Ignition transformer -N152- |
q | With identification for HT cables: |
A = No. 1 cylinder. |
B = No. 2 cylinder. |
C = No. 3 cylinder. |
D = No. 4 cylinder. |
3 - | 10 Nm |
4 - | Connector |
q | 4-pin. |
q | For ignition transformer -N152-. |
5 - | Spark plug, 25 Nm |
q | Type and electrode gap → Chapter. |
q | To remove and install, pull off connectors for outer injectors. |
q | Remove and install with spark plug socket and extension -3122 B-. |
6 - | 2-pin connector |
q | For knock sensor 1 -G61-. |
q | Gold-plated contacts. |
7 - | 20 Nm |
q | The specified torque influences the function of knock sensor 1 -G61-. |
8 - | Knock sensor 1 -G61- |
q | Gold-plated contacts. |
9 - | 10 Nm |
10 - | Hall sender -G40- |
q | Gold-plated contacts. |
11 - | Connector |
q | For Hall sender -G40-. |
q | Gold-plated contacts. |
12 - | O-ring |