Golf Mk4
| Engine code AGN with four-wheel drive |
| 1 - | Gasket |
| q | Renew. |
| 2 - | Heat shield |
| 3 - | Washer |
| 4 - | 25 Nm |
| 5 - | Lambda probe -G39- |
| q | Remove and install with Lambda probe open ring spanner set -3337-. |
| q | Grease threads only with hot bolt paste -G 052 112 A3-, hot bolt paste -G 052 112 A3- must not get into the slots of probe body. |
| 6 - | Front exhaust pipe |
| 7 - | 10 Nm |
| 8 - | Stop plate |
| q | For double clamp |
| 9 - | Separating point |
| q | For repair cases. |
| q | Marked by impressions on exhaust pipe. |
| q | During production, front and rear silencers are installed as a single component. In repair cases, the front exhaust pipe and rear silencer are supplied individually with a double clamp for connecting together. |
| 10 - | Mounting |
| q | With support ring. |
| 11 - | Rear silencer |
| 12 - | Repair double clamp |
| 13 - | 40 Nm |
| 14 - | Front silencer -- |
| 15 - | Double clamp |
| q | Must be slid onto front exhaust pipe up to stop plate → Item. |
| 16 - | Retaining ring |
| q | Must not be installed. |
| q | Produces humming and droning noises at 4,000 rpm. |
| q | → HST 4.2 - 24/2 |
| 17 - | Connecting piece |
| 18 - | Bracket |
| 19 - | 25 Nm |
| 20 - | Exhaust manifold |
