| Dismantling and assembling engine |
Note | t
| If metal shavings or larger quantities of metal particles or other deposits (caused for example, by partial seizure of the conrod bearings) are found in the engine oil when making repairs, clean the oil passages thoroughly and renew the oil cooler and oil filter in order to prevent further damage from occurring later. |
| t
| All bearing points and running surfaces must be oiled before assembly. |
| Assembly overview - parts l and ll → Chapter. |
| Assembly overview - part I, belt drive → Chapter. |
| Assembly overview - part II, cylinder block → Chapter. |
| Removing and installing poly V-belt → Chapter. |
Note | Secure engine to engine and gearbox support -VAS 6095- to carry out repairs. |
|
|
|
