| Removing and installing cylinder head |
Note | t
| To remove and fit spark plug connectors, use only assembly tool -T10029-. |
| t
| If installing an exchange cylinder head with fitted camshafts, the contact surfaces between bucket tappet and cam must be oiled after the cylinder head has been installed. |
| t
| The plastic protectors fitted to protect the open valves must be removed only immediately before the cylinder head is fitted. |
| t
| When replacing the cylinder head the entire coolant must be renewed. |
| Removing and installing cylinder head cover → Chapter |
| Removing and installing cylinder head → Chapter |
|
|
|
