Golf Mk4
Note
|
1 - | Combination valve |
q | Checking → Chapter. |
q | Removing and installing → Chapter. |
2 - | 5 Nm |
3 - | O-ring |
q | Renew |
4 - | Air duct |
q | In cylinder head |
5 - | Bracket |
q | For secondary air inlet valve -N112- and variable intake manifold changeover valve -N156- |
6 - | To fuel pressure regulator |
7 - | To intake manifold upper part |
8 - | Secondary air inlet valve -N112-*/** |
9 - | Connector |
q | Black, 2-pin |
10 - | Non-return valve |
q | White connection points to secondary air inlet valve -N112- |
11 - | To vacuum reservoir |
12 - | To variable intake manifold changeover vacuum actuator |
13 - | To air filter upper part |
14 - | Intake hose |
q | Ensure part is seated securely in retaining clamps on heat shield |
15 - | Secondary air pump motor -V101-** |
16 - | Connector |
q | Black, 2-pin |
q | For secondary air pump motor -V101-. |
17 - | Bracket |
q | For secondary air pump motor -V101-. |
18 - | Rubber mounting |
19 - | Housing |
20 - | 10 Nm |
21 - | Variable intake manifold change-over valve -N156- |
22 - | Connection |
23 - | Pressure hose |
q | Check for secure seating. |
24 - | Gasket |
q | Renew |
25 - | Connection |
q | For combination valve. |