Golf Mk4
Assembly overview - parts of cooling system, body side |
1 - | Radiator/cooler |
q | Removing and installing → Chapter |
q | After renewing, renew entire coolant. |
2 - | O-ring |
q | Renew if damaged. |
3 - | Upper coolant hose |
q | Secured to radiator with quick-release coupling. |
q | Check for secure seating. |
q | Coolant hose schematic diagram → Chapter. |
4 - | 15 Nm |
5 - | Bracket |
q | For radiator |
q | Note installation position. |
6 - | 10 Nm |
7 - | Fan bracket |
8 - | Washer |
9 - | Cowling |
10 - | Right radiator fan -V35- |
q | Checking → Chapter |
11 - | Radiator fan -V7- |
q | Checking → Chapter |
12 - | Connector |
q | For radiator fan on right of radiator -V35-. |
13 - | Connector |
q | For radiator fan -V7-. |
14 - | Retaining clip |
q | Check for secure seating. |
15 - | Lower coolant hose |
q | Secured to radiator with quick-release coupling. |
q | Check for secure seating. |
q | Coolant hose schematic diagram → Chapter. |
16 - | Connector |
q | For radiator fan thermo-switch -F18-. |
17 - | Radiator fan thermal switch -F18-, 35 Nm |
q | For electric fan. |
q | Switching temperatures: |
q | 1st stage on: 92…97°C, off 84…91°C |
q | 2nd stage on 99…105°C, off 91…98°C |