–
| Remove oil pressure switch -F1- and screw it into oil pressure tester -V.A.G 1342-. |
–
| Screw oil pressure tester -V.A.G 1342- into oil filter bracket in place of oil pressure switch using adapter -V.A.G 1342/14-. |
Note Observe installation position of adapter: the conical connecting piece of the adapter must be screwed into the pressure hose of the tester. |
–
| Connect brown wire of tester to earth (-). |
–
| Connect voltage tester -V.A.G 1527B- to battery positive (+) and oil pressure switch using cables from auxiliary measuring set -V.A.G 1594C-. LED must not light up. |
–
| Renew oil pressure switch -F1- → Item. |
If LED does not light up: |
–
| Start engine and run at idling speed, at 1.2…1.6 bar the LED must light up, otherwise renew oil pressure switch -F1- → Item. |
|
|
|