| Dismantling and assembling engine |
Note | Before installation work is carried out, the engine is to be secured to engine and gearbox support -VAS 6095- or engine and gearbox support -VW 540- with the supplementary kit for engine and gearbox support -VW 540/1 B-. |
| Parts I and II - engine codes AQP and AUE - assembly overview → Chapter |
| Parts I and II - engine codes BDE, BFH, BJS and BML - assembly overview → Chapter |
| Part I: chain drive - engine codes AQP and AUE - assembly overview → Chapter |
| Part I: chain drive - engine codes BDE, BFH, BJS and BML - assembly overview → Chapter |
| Part II: assembly overview - crankshaft group → Chapter |
| Removing and installing poly V-belt → Chapter. |
Note | t
| Finding metal shavings or a large quantity of small metal particles during engine repair could indicate that the crankshaft bearings or conrod bearings are damaged. To prevent this from causing further damage, perform the following repairs: |
| t
| Thoroughly clean oil channels. |
|
|
|
