Golf Mk4
Assembly overview - air filter |
1 - | With heating resistor for crankcase breather -N79- |
q | For crankcase ventilation. |
2 - | Connector |
q | Black, 2-pin |
q | For heater element for crankcase breather -N79- |
q | Check power supply for heating resistor between contacts 1 and 2 with engine running. Specification: at least 11.5 V |
3 - | Connecting hose |
q | For air scavenging in injectors |
q | Not for engine codes BFH, BJS and BML |
4 - | Air mass meter -G70- with intake air temperature sender -G42- |
q | Gold-plated contacts on sensor and connector. |
5 - | Connector |
q | Black, 5-pin |
q | Gold-plated contacts on sensor and connector. |
6 - | Seal |
q | Renew if damaged. |
7 - | Air filter upper part |
8 - | 6 Nm |
9 - | Filter element |
10 - | Air filter lower part |
11 - | Air duct |
12 - | 10 Nm |
13 - | Intake hose |
q | For crankcase ventilation. |
q | From breather housing on cylinder head cover |
q | Check for secure seating. |
q | Press together at front to release. |
14 - | From cylinder head cover |
15 - | To crankcase breather valve |
q | Under heater resistor |
16 - | To throttle valve module -J338-. |