Display fault reader -V.A.G 1551- | Possible fault cause | Fault elimination |
Below 230 mg/H | t
| Excessive exhaust gas recirculation |
| |
| | –
| Check intake air system for leaks. |
|
Above 370 mg/stroke | | –
| Run engine at increased speed to warm up and repeat check. |
|
| t
| Insufficient exhaust gas recirculation |
| –
| Engine running at idling speed for more than 2 mins., give brief burst on throttle. |
|
| t
| Defective air mass meter -G70- |
| –
| If a fault is present the measured value block indicates a constant air mass value of approx. 550 mg/H over the complete speed and load range. |
|