| To prevent injuries to persons and/or damage to the injection and glow plug system, the following must be noted: |
| t
| The ignition must be switched off before connecting or disconnecting injection or glow plug system wiring or tester cables. |
| t
| If the engine is to be turned at starter speed without starting, e.g. to check compressions, pull off connector from fuel shut-off valve -N109- on injection pump. |
| t
| Before disconnecting battery, obtain radio code for radios with anti-theft coding. |
| t
| Disconnecting and connecting the battery must only be done with the ignition switched off, as otherwise the control unit for diesel direction injection system -J248- could become damaged. |
| Observe following if test and measuring instruments are required during a road test: |
| t
| Test and measuring instruments must be secured to rear seat and operated by a second person from this location. |
| If test and measuring instruments are operated from front passenger seat and the vehicle is involved in an accident, there is a possibility that the person sitting in this seat may receive serious injuries when the airbag is triggered. |
|
|
|
