volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Checking Hall sender > < Safety precautions
Motronic injection and ignition system (5-cyl. engine)
Servicing ignition system
Test data, spark plugs

Engine code

AGZ

Ignition timing1)2)

Checking

,
Idling check

Firing order

1-2-4-5-3

Spark plugs1)3)

VW/Audi

101 000 035 AH

Manufacturer's designation

BKR 5 EKUP

Electrode gap

max. 0.7 mm4)

Tightening torque

25 Nm

1)     The up-to-date figures and the spark plug change intervals:

=> Exhaust emissions test binder

2)     Not adjustable

3)     Use tool 3277 A to pull off and press spark plug connector on. Remove and install spark plugs with spark plug spanner 3122 B

4)     Gap between earth electrode and centre electrode insulation

Checking Hall sender > < Safety precautions