Golf Mk4
| III - Assembly overview - suspension strut |
| 1 - | Self-locking hexagon nut, 60 Nm |
| q | Renew each time after removing. |
| 2 - | Stop |
| 3 - | Suspension strut turret |
| 4 - | Hexagon nut, 60 Nm |
| 5 - | Suspension strut mounting |
| 6 - | Deep groove ball thrust bearing |
| 7 - | Bush |
| Fitted only in vehicles with heavy duty suspension (PR No. 1GB) |
| This PR No. can be found on the vehicle data sticker in the luggage compartment or Service booklet. |
| 8 - | Spring plate |
| 9 - | Coil spring |
| q | Observe colour coding. |
| q | Surface of coil must not be damaged. |
| q | Allocation to vehicle → Chapter. |
| 10 - | Self-locking nut |
| q | 50 Nm and turn 90° further. |
| q | Renew each time after removing. |
| 11 - | Hexagon bolt, 10 Nm |
| 12 - | Bracket |
| 13 - | Heat shield |
| 14 - | Hexagon bolt |
| q | Renew each time after removing. |
| q | The tip of the hexagon bolt must face forwards. |
| 15 - | Clip |
| 16 - | Wheel bearing housing |
| 17 - | Self-locking nut |
| q | 60 Nm and turn 90° further. |
| q | Never less than 90°! |
| q | Turning angle tolerance 90° to 120°. |
| q | Renew each time after removing. |
| 18 - | Clamp |
| 19 - | Coupling rod |
| 20 - | Shock absorber |
| q | Can be renewed separately. |
| q | Allocation → Genuine parts catalogue. |
| 21 - | Bump stop |
| 22 - | Protective sleeve |
