volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Renewing bonded rubber bushes in subframe > < Removing

Golf Mk4

Installing
Installing
Before inserting bolts for subframe, position steering box on subframe and insert steering box bolts.
   
The threaded sleeve -1- for the steering box must sit in hole in subframe.
Further installation in reverse order.
After installation, check position of steering wheel during road test.
If the steering wheel is off centre, wheel alignment must be checked and adjusted.
  N48-0284
Torque settings 
Swivel joint to suspension link
Use new bolts!		20 Nm + 90°
Pendulum support to subframe 25 Nm
Pendulum support to gearbox 
M 10 x 70
M 10 x 30		50 Nm
50 Nm
Pendulum support to gearbox in vehicles with manual gearbox 02T 
M 10 x 70

M 10 x 30		40 Nm + 45°
40 Nm + 45°
Steering box to subframe
Use new bolts!		20 Nm + 90°
Coupling rod to anti-roll bar
Use new bolts!		15 Nm + 90°
Subframe to body
Use new bolts!		100 Nm + 90°

   

Renewing bonded rubber bushes in subframe > < Removing