Golf Mk4
| Assembly overview - subframe with final drive |
| 1 - | Multi-point socket head bolt, 60 Nm |
| 2 - | Bonded rubber bush for final drive |
| q | Removing and installing → Chapter. |
| 3 - | Multi-point socket head bolt, 60 Nm |
| 4 - | Bonded rubber bush for subframe |
| q | Replacement part is supplied in a sealed plastic bag |
| q | Do not use bonded rubber bushes which have been stored unsealed. |
| q | Removing and installing → Chapter. |
| 5 - | Hexagon bolt M 12 x 1.5 x 85 |
| q | 110 Nm and turn 90° further. |
| q | Renew each time after removing. |
| 6 - | Subframe |
| q | Removing and installing → Chapter. |
| 7 - | Multi-point socket head bolt, 60 Nm |
| 8 - | Multi-point socket head bolt, 60 Nm |
| 9 - | Final drive support |
| 10 - | Hexagon socket head bolt, 40 Nm + 45° |
| q | M10 × 55 |
| 11 - | Hexagon socket head bolt, 40 Nm + 45° |
| q | M10 × 40 |
| 12 - | Final drive |
| q | Repairing → Rep. Gr.39 |
| 13 - | Self-locking nut, 25 Nm |
| q | Renew each time after removing. |
| 14 - | Anti-roll bar |
| 15 - | Hexagon bolt, 20 Nm |
| 16 - | Clamp |
| 17 - | Coupling rod |