Golf Mk4
Assembly overview - shock absorber on vehicle with front wheel drive |
1 - | Gas-filled shock absorber |
q | Can be renewed separately. |
q | Allocation → Genuine parts catalogue. |
Functional check |
Compress shock absorber by hand. It should be possible to press in the piston rod smoothly and with uniform force over the full travel. |
The piston rod will return to its initial position if there is sufficient gas pressure in the shock absorber. |
If the piston rod does not return to its starting position, the shock absorber may still be OK, provided there is no loss of oil. |
2 - | Protective cap |
3 - | Protective tube |
4 - | Bump stop |
5 - | Shock absorber mounting |
6 - | Self-locking hexagon nut, 25 Nm |
q | Renew each time after removing. |
q | Removing → Fig.. |
7 - | Cover |
|